PulseGuard Pulsation Dampeners

Fluid Flow Control Animations
PulseGuard Pulsation Dampeners
Contact PulseGuard
 

A.O.D.D. Pump Pulsation Dampener Standard Installations

How to ensure lowest in place cost and most performance by standard pulsation dampener installation methods. Pump 3 times farther with no greater air A.O.D.D. supply, make flow as smooth as a turbine, install Plastic or SS + Elastomer or "FlexFlon", pulsation dampeners. When you see a dampener or a pump of particular interest, please request literature dedicated to that subject.


AODD Pump


Pulsation Dampener site - arrow Click Here for pulsation dampeners for AODD pumps listed by dimensions and connection size


A.O.D.D. PUMPS with dampeners in: PLASTIC     "Flexflon"     STAINLESS    FLO-THRU

Plastic + Elastomer gas bag please go to the PipeGuard PLASTIC range dimension tables of off the shelf inventory items, dimensions, weights and drawings of PVC or PolyPropylene units.
Below 40psi (approx. 3 BarG) the pressure used to drive a liquid of more than 50 cP into a halt, back out again from a "T" piece, and leave pulsation in the system.
If you want smooth flow below 40psi, or to be able to flush your system, then always use a FLOW-THROUGH two connection pulsation dampener.

Stainless + Elastomer bladder (gas bag) . Please go to the range dimension tables of off the shelf inventory items, dims, weights and drawing.

The susceptibility to damage of plastics and the lower cost of our all stainless dampeners make PipeGuard the safer and better value choice

Stainless + "Flexflon" please go the Pulsation Dampeners - PTFE Diaphragm FlexOrber SS/LP range dimension tables of off the shelf inventory items, dims. Weights and drawing.
Stainless + "FlexFlon" please go the FlexOrber SS/LP range price list of off the shelf inventory items,
Single connection pulse dampeners are also available, but flow-thru is standard. Single connection is more costly. You can always take a 2 connection and use one & the other for system drain.
Plastic + "Flexflon" please go to the Plastic + "FlexFlon" dampeners please go to the FlexOrber PLAS dampener range price list of off the shelf inventory items, dimensions, weights and drawing. SS/LP dampener range dimension tables for off the shelf inventory items, dimensions, weights and drawing.
For your PTFE compatible applications we offer LDi “FlexFlon”, which is PTFE that has been remelted and molded to provide flexibility without elastomeric backing.
For your PTFE compatible applications we offer LDi “FlexFlon”, which is PTFE that has been remelted and molded to provide flexibility without elastomeric backing.

Plastic or Stainless wetted + Elastomer FlexTube pulsation dampeners are for high viscosity, and food or beverage applications. Please go to the dampener range dimension tables, "parts to build" items, and drawing, or select by connection.

PumpGuard/PLAS in PVC or PP All boltings are in “thread-certs” end faces to ANSI 150# or DIN PN10. Hydraulically (water) operated, PumpGuard/PLAS in PVC or PP All boltings are in “thread-certs” end faces to ANSI 150# or DIN PN10. Hydraulically (water) operated,

PulseGuard Pulsation Dampeners
Dampeners that do, flow goes through but pressure pulsation does not.

PulseGuard pulsation dampeners are designed to address pressure pulsation, which is caused by the resistance of the system to flow. Therefore our dampeners focus on the system related responsibility and are less related to pump liability.

 



Fluid Flow Control Pulsation Dampeners