PDF PG43 SoG INSTALLATIONS

PulseGuard Low Pressure Flexorber Pulsation Dampener Installation

For the ultimate in smoothness where pressure is below 100 Bar (1450 psi) and elastomer synthetic rubber is NOT compatible. Nitrogen drive bonnets are stainless.

LP FlexOrbers are everywhere when pipes are longer than 200 times their diameter.

For liquid expansion and contraction compensation.
"Flexflon" diaphragms provide:- 1. 10 times more life than a machined bellows. 2. Greater impermiability 3. At half the cost.	Flow through gives you: - 3 times the smoothness, of a single connection "Td" off line. Self purging in place flushability. Constant agitation no sediment 22% saving; 2 ports are standard
From 0.5 in3 / 8 ml to 1000 in3 / 16+ Liters 100s "off the shelf" inventory

Selecting Pulsation Dampeners for Different Pump Systems
Flow through pulsation dampeners are at least 3 times more efficient than T off line accumulators.

Dampeners that do, flow goes through, but pressure pulsation does not.

CLICK HERE FOR: Flow Fluctuation, Pressure Pulse Damping, Shock Alleviation, Multi-head Interaction