PulseGuard Pulsation Dampeners

Fluid Flow Control Animations
PulseGuard Pulsation Dampeners
Contact PulseGuard
 

PulseGuard Pulsation Dampeners PDF PDF PG 55 & 56 FLo Dimension Tables Printable Version
Pulsation Dampener site - arrow Drawings below

Pulsation Dampeners with PTFE Diaphragms for High Pressure

FLo - High Pressure
Pulsation dampeners with elasticized modified PTFE diaphragm material for hazardous, carcinogenic, and pyroforic applications.

Due to the instability of metal prices, please call the factory for pulsation dampener prices.

**ss may be replaced with: A20 for Alloy 20, TIT for Titanium 2, H22 or HC276 for Hastelloy, Tan for Tantalum, etc.
B=BSP//, N=NPT, M=MALE, F=FEMALE, W=37 DEGREES WELD BEVEL, INCH THREAD SIZES ARE UNC, on=PCD, #=ANSI B16.5
Unless otherwise stated, N2 contact parts are epoxy coated carbon steel.
D.P. @200F PSI & D.P. @93C Bar - Using an MDMT of -20 and a low working stress to prevent high cyclic duty, fatigue failure.
Dinension Specifications L in, D in, lbs, Without Fittings - Excludes elbows, flanges, unions, weld-preps, etc.
Connection Single: for Flow Fluctuation Only - Prevents acceleration head pressure pulse generation, but without any system response interception.
Call for quantity discount.

Connections To Pump NPT & To System NPT - Exceptional flow smoothing, pressure pulsation interception, and in place flushing.

 

 

PulseGuard Pulsation Dampeners
Phone: 910-270-2737 • Toll Free: 1-888-DAMPERS (326-7377) • Fax: 910-270-2739
295 Sloop Point Loop Road, Hampstead NC, 28443 USA • Contact Us



Fluid Flow Control Pulsation Dampeners