PulseGuard Pulsation Dampeners

Fluid Flow Control Animations
PulseGuard Pulsation Dampeners
Contact PulseGuard
 

High Pressure PipeGuard Bladder Pulsation Dampener Sizes

 

High Pressure Gas in Elastomer Bladder Type Pulsation Damper Sizes HOME

PipeGuard

Small | Medium | Large | Low Pressure | High Pressure | Ultra High Pressure | More Information

PipeGuard Typical volumes and pressures for small HP gas in elastomer bladder type pulsation dampers.
Type / Ordering Volume Design Pressure @200 F Connections (to pump / to sys.) BS4504 DIN 2501 / ANSI B 16.5 Length without pipes Diameter Weight Spares Kit Part Number
  (in3) (PSI)     (inches) (inches) (pounds)  
PiG-** 6 5000 3/8"Fx1/4"FN 1/2" 250# 7.125 2.5 13 B44x75 ?
PiG-SS 15 4500 1/2"Fx3/8"FN 4x3/8" on 2.25" PCD 8.54 2.8 22 B57x98 ?
PiG-SS 40 2500 3/4"Fx1/2"FN 4x1/2" on 2.5" PCD 11.1 3.5 33 B62x207 ?

 

Small | Medium | Large | Low Pressure | High Pressure | Ultra High Pressure | More Information

PipeGuard Typical volumes and pressures for medium HP gas in elastomer bladder type pulsation dampers.
Type / Ordering Volume Design Pressure @200 F Connections (to pump / to sys.) BS4504 DIN 2501 / ANSI B 16.5 Length without pipes Diameter Weight Spares Kit Part Number
  (in3) (PSI)     (inches) (inches) (pounds)  
PiG-SS 75 2500 1.0"Fx3/4"FN 4x1/2" on 2.5" PCD 17 3.46 48 B72x315 ?
PiG-SS 100 2700 1.25"Mx1.0"FN 4x3/4" on 3.5" PCD 13.76 4.49 55 B98x232 ?
PiG-SS 120 2500 3.0"Mx2.0"MW DN25PN410 / 1" 2500# 11.8 6.7 66 B139x105
PiG-SS 120 2700 1.5"Mx1.5"MN 4x3/4" on 3.5" PCD 15.94 4.49 60 B98x300 ?
PiG-SS 170 2300 2.0"Mx1.5"MN DN20PN258 / 1" 1500# 14.37 5.55 80 B123x250
PiG-SS 200 2300 2.0"Mx2.0"MN DNMPN291 / 1" 1500# 16.46 5.55 88 B123x295
PiG-SS 240 2500 3.0"Mx2.0"MW DN25PN410 / 1" 2500# 15.7 6.7 82 B139x205
PiG-SS 250 2300 2.0"Mx2.0"MN DNMPN291 / 1" 1500# 18.5 5.55 100 B123x357

 

Small | Medium | Large | Low Pressure | High Pressure | Ultra High Pressure | More Information

PipeGuard Typical volumes and pressures for large HP gas in elastomer bladder type pulsation dampers.
Type / Ordering Volume Design Pressure @200 F Connections (to pump / to sys.) BS4504 DIN 2501 / ANSI B 16.5 Length without pipes Diameter Weight Spares Kit Part Number
  (in3) (PSI)     (inches) (inches) (pounds)  
PiG-SS 488 2500 3.0"Mx2.0"MW DN25PN410 / 1" 2500# 24 6.7 101 B139x420
PiG-SS 693 3500 3"Mx3"MW DN65PN250 / 2" 1500# 24 8.62 211 B195x360
PiG-SS 1220 3500 3"Mx3"MW DN80PN250 / 2.5" 2500# 30 10.75 389 B230x500
PiG-SS 2135 3500 4"Mx4"MW DN100PN160 / 3" 2500# 36 12.75 630 B260x600
PiG-SS 3050 2500 5"Mx5"MW DN150PN250 / 4"1500# 42 14 748 B300x700

 



Fluid Flow Control Pulsation Dampeners