PulseGuard Pulsation Dampeners PDF Catalog
These pages are for information. The section below headed maintenance is for your information but not as instructions to be followed by persons who are not qualified by training and certification from PulseGuard Inc, PulseGuard Ltd. PulseGuard China, PulseGuard India.
The PulseGuard pulsation dampener products are for pressure purposes and may be dangerous. PulseGuard pulse dampeners should therefore only be serviced / maintained by qualified personnel, appropriately certified, with current up to date certificates.
PulseGuard US UK India and China will rebuild, test, and re-pressure certify PulseGuard pulsation dampening equipment at the same price as the cost of a spares kit from the factory. If you do not have a local certified rebuild service facility, apart from the spares cost the only expenditure required of you is to pay for the shipping to your nearest PulseGuard certified point of assistance.
The links below are PDF versions of pages, for alternates visit the Site Index.
Safety and IOM | Pumps | Calculation | FlexOrbers | PipeHuggers | PipeGuards | PumpGuards | WaveGuards-CavGuards | Food and Drug
Safety, Installation, Operation and Maintenance |
|
SAFETY
Read this first - "Beware of "Pressure Vessel Codes"
|
|
saf-1 Cover / Contents
saf-2 Contact & Safety Warnings for Pulsation Dampeners
saf-3 Checking Pulsation Dampener Pressure Rating Safety
saf-4 Pulsation Dampeners - Safety & Gas Overload Protection
saf-5 Safety & Liquids for Pulsation Dampeners
saf-6 Safety & Piping by Pulsation Dampener Mounting Blocks
saf-6 Check Flow Rate For Pipe Size, & Pulse Frequency
saf-7 Checking Required Performance of Pulsation Dampeners
saf-8 3-Axis Graph to Specify Residual Pressure Fluctuation |
PDF PG120
PDF PG121
PDF PG122
PDF PG123
PDF PG124
PDF PG125
PDF PG125
PDF PG126
PDF PG127 |
|
|
OPERATION
|
|
pf-1 General Advice before Pre-Filling Pulsation Dampeners with Nitrogen Gas
pf-2 Pre-Filling Pulsation Dampeners - Low Cost Pressure Dampeners have "Pin Core" Valves
pf-3 Pre-Filling Pulsation Dampeners - Strut Valve Opened and Closed with 3/4" Wrench
pf-4 Pre-Filling Pulsation Dampeners with Nitrogen Gas at Elevated Pressures |
PDF PG136
PDF PG137
PDF PG138
PDF PG139 |
|
|
INSTALLATION
|
|
i-1 Dampener Installation Cover
i-2 Centrifugal Systems
i-2 Hose Pump Systems
i-3 Vane Pumps Systems
i-3 Intensifier Plunger Pump Systems
i-4 Gear Pump Piping Systems
i-4 Diaphragm Head "Metering" Systems
i-5 Packed Plunger Pump Pipe Systems
i-5 Lobe Pump Systems
i-6 Progressive Cavity Pump Systems
i-6 Air Operated Double ended Diaphragm Transfer Pumps
i-7 Multiplex Pump Systems
i-7 Dosing Pump Systems
i-8 Install Pump Description |
PDF PG128
PDF PG129
PDF PG129
PDF PG130
PDF PG130
PDF PG131
PDF PG131
PDF PG132
PDF PG132
PDF PG133
PDF PG133
PDF PG134
PDF PG134
PDF PG135 |
|
|
MAINTENANCE
|
|
xplo-1 PG140 Dampener Maintenance Cover
xplo-2 PG141 Flexorber LP SoG
xplo-2 PG141 Flexorber VLP SoG
xplo-3 PG142 Flexorber HP FLo
xplo-3b Hazard Class Bolt on Anti-extrusion for Pyroforic Applications
xplo-4 PG143 PipeHugger -LP,-HP, -Lnd
xplo-5 PG144 PipeGuard -LP, -HP, -Plas
xplo-6 PG145 PumpGuard
xplo-6 PG145 WaveGuard HP
xplo-7 PG146 PipeGuard UHP
xplo-7 PG146 PipeHugger HP, UHP
xplo-8 PG147 "XRACTOR" RIGS
PG-148 Anti-Extrusion Plate Replacement |
PDF PG140
PDF PG141
PDF PG141
PDF PG142
PDF PG143
PDF PG144
PDF PG145
PDF PG145
PDF PG146
PDF PG146
PDF PG147
PDF PG148 |
Pumps |
|
P1 Contents |
PDF PG1 |
P3 Centrifugal - Application story
P4 Centrifugal Pump Dampener Dimension Tables |
PDF PG3
PDF PG4 |
P5 Vane - Application story
P6 Vane Pump Dampener Dimension Tables |
PDF PG5
PDF PG6 |
P7 Gear - Application story
P8 Gear Pump Dampener Dimension Tables |
PDF PG7
PDF PG8 |
P9 Lobe - Application story
P10 Lobe Pump Dampener Dimension Tables |
PDF PG9
PDF PG10 |
P11 Screw - Application story
P12 Screw Pump Dampener Dimension Tables |
PDF PG11
PDF PG12 |
P13 Progressive Cavity - Application story
P14 Progressive Cavity Pump Dampener Dimension Tables |
PDF PG13
PDF PG14 |
P15 Hose/Tube - Application story
P16 Hose/Tube Pump Dampener Dimension Tables |
PDF PG15
PDF PG16 |
P17 A.O.D.D. - Application story
P18 A.O.D.D. Pump Dampener Dimension Tables |
PDF PG17
PDF PG18 |
P19 Packed Plunger - Application story
P20 Packed Plunger Pump Dampener Dimension Tables |
PDF PG19
PDF PG20 |
P21 Metering - Application story
P22 Metering Pump Dampener Dimension Tables |
PDF PG21
PDF PG22 |
P23 Multiplex "Power" - Application story
P24 Multiplex "Power" Pump Dampener Dimension Tables |
PDF PG23
PDF PG24 |
P25 LP Dosing - Application story
P26 LP Dosing - Plunger Dimension Tables |
PDF PG25
PDF PG26 |
P27 Intensifier - Plunger Dimension Tables |
PDF PG27 |
Calculation / Anatomy of Pulsation |
|
Contents
P28 - Specifying - by System Characteristics
P29 - System Mass Acceleration Head Pulsation
P30 - Adding the Piping Flow Friction Pulsation
P31 - Adding for System Compressibility Loss of "Overlap", Pulsation
P31 - Adding for "Velocity Jump" transients
P32 - Checking Total Pulsation vs. Allowable Level for the Piping
P33 - Input Data to Address System Pressure
P34 - Estimating the Volume of One Pulse
P34 - Applying Pump Type "F" Factor & Flow Stabilizer Size Selection
P35 - Checking System Smoothness Requirements
P36 - Minimizing Residual Pulsation by Proper Installment |
PDF page
PDF PG28
PDF PG29
PDF PG30
PDF PG31
PDF PG31
PDF PG32
PDF PG33
PDF PG34
PDF PG34
PDF PG35
PDF PG36 |
FlexOrbers |
|
P41 - Contents
P42 - The Difference is in the detail
|
PDF PG41
PDF PG42 |
P43 - LP, SoG Installation
P44 - LP, SoG Flow Fluction Smoothing
P45 - LP, SoG Pressure Pulse Damping
P46 - LP, SoG Shock Alleviation
P46 - LP, SoG Multihead Interaction
P47 - LP, SoG Dimension Tables
P48 - LP, SoG Dimension Tables cont. & Drawings
P49 - LP, SoG Viewsheet
P50 - LP, SoG LP Service, Maintenance
P51 - LP, SoG VLP Service, Maintenance
P52 - LP, SoG Lined, Non-Metallic Metal Parts |
PDF PG43
PDF PG44
PDF PG45
PDF PG46
PDF PG46
PDF PG47
PDF PG48
PDF PG49
PDF PG50
PDF PG51 |
P53 - HP, FLo Installation
P54 - HP, FLo Application Story
P55 - HP, FlexOrber Dimension Tables
P56 - HP, FlexOrber Dimension Tables cont. & Drawings
P57 - HP, FLo Viewsheet
P58 - HP, FLo Service, Maintenance
|
PDF PG53
PDF PG54
PDF PG55
PDF PG56
PDF PG57
PDF PG58 |
PipeHuggers
|
|
P61 - Contents |
PDF PG61 |
P71 - LP, PeG Installation
P72 - LP, PeG Application Story
P69 - LP, PipeHugger Dimension Tables
P70 - LP, PipeHugger Dimension Tables cont. & Drawings
PC/C - C/C & Multiple Sets.
PC/L - "Close Coupled" C/L
P73 - LP, PeG Service, Maintenance
P74 - LP, PeG Selection Check List
P75 - LP, PeG Comparitive Cost Installed |
PDF PG71
PDF PG72
PDF PG69
PDF PG70
PDF PC/C
PDF PC/L
PDF PG73
PDF PG74
PDF PG75 |
P63 - HP, PHr Installation
P64 - HP, PHr Application Story
P65 - HP, PipeHugger Dimension Tables
P66 - HP, PipeHugger Dimension Tables cont. & Drawings
P"O" - Popular: "O" face +PB
TYPICAL - Typical HP Flange Face
PPFF/TD - "FF" or Thread "TD"
PipeB - HP & SP w/ BBlcks.
P67 - HP, PHr Service, Maintenance
P62 - HP, PHr Selection Check List
See also: PipeHugger Pulsation Dampener IOM |
PDF PG63
PDF PG64
PDF PG65
PDF PG66
PDF P"O"
PDF TYPICAL
PDF PFF/TD
PDF PipeB
PDF PG67
PDF PG62
PDF PipeHugger IOM |

|